HometopmenuProductstopmenuRepair & MaintenancetopmenuHealth, Safety & TrainingtopmenuEnvironmentaltopmenuTechnical SpecificationstopmenuGallerytopmenuNews
Midway Industrial Doors Limited TEL: 01782 773771
Euroflex and Eurospeed Insulated Roller Shutter Door

 ► Return to product page

SHUTTER CURTAIN

Constructed from pre-galvanised material. Ecotech formula foam infill - CFC free/ODP zero with a low global warming potential value of 3. Each panel section is 94mm deep with multi-ribbed face for rigidity.

The curtain, when assembled is held in position with purposely-designed injection moulded end fittings, manufactured from hardwearing nylon-6, which sits on the outside of the panels minimising scuffing and damage.

BOTTOM SEAL

The bottom panel of the shutter is terminated with a specially designed aluminium extruded section complete with interlocking (EPDM) rubber weather seal.

BARREL

Manufactured from seamless mild steel tube to BS4760 Grade 50C. Size to suit door width and height. Maximum barrel deflection 1:400. Fitted with precision-machined BDMS axles to BS970 EN33.

MAIN SUPPORT BRACKETS

The main support brackets for the barrel and motor unit are manufactured from mild steel plates of varying thickness and incorporate the necessary fixing positions for securing back to the opening structure.

VERTICAL SIDE GUIDES

Formed from pre-galvanised material having a minimum thickness of 2.5mm incorporating twin vertical brushes on both inner and outer face of the guide. Brush carrier is constructed from PVC of medium impact strength, finished black and incorporating twin siliconised polypropylene weather strips, these running the full height of the door guide. The guide form is designed to allow reduced working faces and tapered inner faces to provide automatic interlocking/retaining feature for performance of retention under wind load. Complete with continuous 100 x 65 galvanised fixing angle.

OPERATION

The door is arranged for an electric motor unit with manual hand hoisting and lowering facility. The motor unit is complete with an in-built safety drive system. Operating voltage 400V 3 phase IP54 protection 60% duty cycle maintenance free and TUV tested, complying with all current European safety standards. Opening speed 220mm per second on the Euroflex and upto 750mm per second on the Eurospeed.

 

CONTROL OPTIONS

Both the above products are available with a wide choice of control options and safety features.

 

 

 

Homebottom menuProductsbottom menuRepair & Maintenancebottom menuHealth, Safety & Trainingbottom menuEnvironmentalbottom menuTechnical Specificationsbottom menuGallerybottom menuNews